Choosing a custom pivot door involves more than selecting a finish. The opening, door construction, hardware, installation conditions and required performance all need to work together. This checklist helps homeowners, architects and builders prepare a clear brief before requesting a quote.
Use it to compare proposals and identify the information still needed for your project. Final dimensions, hardware selection and installation details should be confirmed for the selected door system.
1. Define the Opening and Intended Use
Start with the project location and the type of opening. An interior partition, a sheltered entrance and a fully exposed exterior door have different requirements. Identify the intended use before comparing systems.
- Opening dimensions: Provide the width and height, stating whether these are rough-opening or finished-opening measurements. Use millimeters or inches and label the units.
- Opening layout: Identify sidelights, transoms, adjacent walls and the desired direction of movement. Include the clear passage width your project requires.
- Site conditions: Share drawings or photographs showing the entrance, floor levels and nearby construction.
2. Compare Door Construction and Finishes
Compare the complete door assembly, including the frame, leaf, surface finish, glazing and seals. A similar appearance does not necessarily mean that two systems have the same construction or performance.
Explore Kingston pivot door systems, including system pivot doors and aluminum glass pivot doors. Ask which series and finish options suit your intended application.
- Opaque or glazed design: Explain your preferences for privacy, daylight and appearance.
- Finish selection: Request available samples and confirm the finish, texture and maintenance information before ordering.
- Glazing: Identify any project requirements for safety, privacy, solar control or insulation, then review the available configuration.
3. Match the Hardware to the Door
Hardware selection depends on the door dimensions, complete panel weight, pivot position and desired operation. A single weight limit or generic specification should not be applied to every design.
Ask for the proposed hardware model and the documentation that applies to it. Confirm closing control, opening angle and hold-open options where relevant. Review lock or access-control compatibility before the configuration is finalized.
Request Hardware Specifications4. Specify Exterior Performance Requirements
For exterior installations, identify the requirements that apply at the project location. Discuss thermal performance, air and water resistance, wind exposure and security with your project team.
Request supporting documents for the proposed assembly. Check the tested model, size, glazing and hardware configuration, rather than assuming that a result for one door applies to every door in the range.
For projects in North America or the Middle East, provide the destination country and any requirements specified by the architect, consultant or local authority. Product suitability must be reviewed against those project requirements.
Send Your Project Requirements5. Coordinate Installation Before Production
Review the proposed door drawings with the installer and project team before approval. Confirm the supporting construction, mounting locations, floor finishes, threshold and drainage details relevant to the selected system.
For powered locks or access control, coordinate any required wiring. Use the installation instructions for the actual hardware and door system, and arrange any necessary structural review with the responsible project professional.
If an installed door binds, moves unexpectedly or has excessive play, arrange an assessment by a qualified installer. Share the product details and photographs when requesting support.
Ask About Installation SupportWhat to Send for a Custom Pivot Door Quote
A clear project brief makes proposals easier to compare. Include:
- Project country, city and intended installation location.
- Door quantity and opening dimensions, with units.
- Preferred design, finish, glazing and opening layout.
- Relevant drawings, door schedules or reference photographs.
- Required performance, supporting documents and access-control options.
- Project stage, target delivery date and delivery destination.
Ask the proposal to distinguish the included configuration from optional items and installation responsibilities. Review available catalogs and technical resources, or contact Kingston to discuss documents for your selected system.
Request Technical Documents